Product Model: PS12-12S

Fonte de alimentação externa à prova d'água 12W DC 12V 1A

  • IP67 waterproof, sealed with eco-friendly resin;
  • Wide input voltage: AC 100-260V, stable DC12V 1A output;
  • Compact design: 50x50x25mm, with mounting holes;
  • Surface temperature stays below 45°C;
  • Easy installation with clear, durable laser-printed labels.

Resumo do Produto

The PS12-12S is an efficient outdoor power supply, ideally suited for powering outdoor security cameras and other devices. It supports a wide voltage input of AC 100-260V and steadily outputs DC12V 1A. Additionally, its compact design with mounting holes allows for flexible installation in various outdoor settings.

Imagem mostrando água caindo em cascata sobre uma fonte de alimentação à prova d’água, destacando suas excepcionais capacidades à prova d’água e apresentando ícones para proteção contra curto-circuito, sobretensão e sobrecorrente.

Desempenho à prova d'água IP67

Its suitability for outdoor use stems from its IP67 waterproof rating. The epoxy resin, injected into the power supply casing using a máquina de envasamento de cola, cools and solidifies, sealing the internal electronic components for exceptional waterproof performance. This eco-friendly resin also excels in heat dissipation, keeping the product surface temperature below 45°C. Once cured, it offers high hardness and a smooth surface, enhancing the durability of this outdoor power supply.

Equação ilustrativa que mostra a transformação de uma fonte de alimentação à prova d'água de pré-envasamento com PCBA exposto e um barril de resina epóxi, para uma fonte de alimentação totalmente encapsulada e à prova d'água à direita.
Image depicting an outdoor power supply with a symbolic shield in front, representing protection against short circuits, over-voltage, and over-current for enhanced safety and reliability.

Segurança garantida: proteção avançada

Class II: Double Insulation

Proteção contra curto-circuito

Proteção contra sobretensão

Proteção contra sobrecorrente

PODEROSO em Performance, mini em formato

Although of an ultra-compact size(50x50x25mm), PS12-12S provides a stable 12W(DC12V 1A) power output.

A hand gently holding an outdoor power supply between thumb and index finger, emphasizing its compact size with dimensions marked as 50x50x25mm beside the unit.

Fácil de instalar

This outdoor power supply features two screw holes for easy installation, an AC input cable for connecting to a power source, and a galvanized 5.5×2.1mm DC plug suitable for security cameras. These design elements are all geared towards facilitating quick and effortless setup for users. Moreover, the label on the unit are laser-printed, ensuring they remain clear and intact even in outdoor environments.

Image showing two outdoor power supplies, one from the front and the other from the back, featuring marked elements like the AC cable, 5.5x2.1mm DC plug, laser-printed label, and mounting holes, illustrating the product's easy installation.
Entrada
Faixa de entrada 90-264 VCA, 47-63 Hz
Corrente CA ≤ 0,4A
Eficiência ≥ 78%
Sem consumo de carga ≤ 0,3 W
Corrente de fuga < 0,25 mA
Saída
Voltagem de saída 12 VCC (± 5%)
Corrente nominal 1A
Regulamento da linha ±3%
Regulação de Carga ±5%
Ondulação e ruído ≤ 200 mVp-p
Configuração, subida, tempo de espera 3s, 40ms, 5ms
Ambiente
Temperatura de operação -20°C a 50°C
Umidade operacional RH 10% a 96% (sem condensação)
Temperatura de armazenamento -40°C a 80°C
Umidade de armazenamento RH 5% a 96% (sem condensação)
Altitude -50m a 5000m (AMSL)
Segurança
Proteção Sobrecorrente/sobretensão/curto-circuito/proteção contra surtos (1KV)
Resistência Dielétrica (Hi-Pot) 3000 VCA/5 mA/1 min
Resistência de isolamento ≥ 100 MΩ a 500 VCC
Padrão EMI EN55032 Classe B
Confiabilidade
Vibração Varredura de 5 ~ 10 ~ 200 ~ 500 Hz nas marchas de mudança por 20 minutos para cada eixo (X, Y, Z)
Teste de queda total duas vezes em superfície aleatória, altura de queda = 1m, queda na superfície de cimento
Teste de impacto de esfera de aço A bola (500g, Φ = 50 mm, altura de queda livre = 1,3 m) impacta a superfície superior e inferior, sem rachaduras
MTBF ≥ 50.000 horas a 25°C com carga total
Outros
Dimensão 50x50x25 mm (CxLxA)
Peso líquido 110g

Consulta de produto